Loohan Forums
Anyone can read; just hit the Index tab. Permission is required to post. No agents need apply.
Posts in the wrong category will be relocated.
New registrants: if you try to register you will get a message that we are not accepting new members. Due to the limitations of this forum software which is not designed to deal with incessant CIA harrassment, we have no alternative but to disable automatic registration, and then we can't change this automatic message. Your account needs to be created by admin before you can post in the forums. Because otherwise, almost all registrants are CIA sock puppets. To get a forum account you need to send a brief presentation email to loohanforum at gee mail dot com, also suggesting a user name. Then we can enable you manually. But before you even do that, take a look around the forum and my site and decide whether you REALLY WANT to join/post, before you jack us around. Most seemingly genuine people who apply fail to even ever log in once to change their password after we go through the work of creating a membership for them. Then we must quickly delete their account again lest the CIA has intercepted their temporary password. And of the few who do change their password, most still never post. Maybe they realize we are too weird for them, I don't know. They get real quiet, never to be heard from again.
GLOSSARY: Sometimes unusual terminology or abbreviations are used that with some luck you might find defined here.
You are not logged in.
- Topics: Active | Unanswered
#16 2025-01-15 09:55:42
- Loohan
- Administrator
- Registered: 2014-10-31
- Posts: 33,612
Re: high frequency facial wands
Wow, i didn't think this big manifester crystal was being programmed until i got nudged that it was complete. Seems to be holding its charge so far.
Mwahaha.
Offline
#17 2025-01-24 09:17:14
- Loohan
- Administrator
- Registered: 2014-10-31
- Posts: 33,612
Re: high frequency facial wands
9 days later, i've only had 2 more epoxy-based items come off the zinging setup. one only just now, and it had been on there for several days prior to my last post. So it can take a long time.
In fact i have several more that have been on a long time that feel 95%+ done but might be stalled there and might not take more charge. Or else it has really slowed down terribly. The fact that i am getting 95% makes me suspect the latter.
I also have a large brass rod that seems to be taking quite a charge but i have no impression of how much more it may take. Or whether it will hold it.
Also several more substantial quartzes that seem to be taking on a charge.
But water in glass bottles seems to charge faster, I have several liter bottles of filtered water on, and am starting to drink a bit daily.
I have not done more concrete yet. Had a bunch of snow and icy weather so didn't do much outside.
[Update next day:] another MASSIVE Chinese crystal just got the full charge.
I need to try some smaller crystals. And crude quartz rocks. I suspect they might be killer in environmental gifts.
I do have a resin TB on the pile, but don't detect that it is getting charged.
Offline
#18 2025-01-26 10:16:02
- Loohan
- Administrator
- Registered: 2014-10-31
- Posts: 33,612
Re: high frequency facial wands
I had an odd trouble with my 2nd Houzzi wand. The first thing i tried to do with it was in my crawlspace. I have a leaky area in my crawlspace where there is a bit of standing water on the concrete perimeter foundation. I set the unit on a slab of styrofoam, with the wire dangling into the water. The instant i turned up the knob, it silently tripped the GFCI (a type of circuit breaker in the wall). Then i had the impression the unit no longer seemed to work, just made a loud buzzing noise.
Then today i checked it again. It does work, A definitive way to test that is to touch the copper to one of the glass tubes in the kit; it should light up. But it is several times as noisy as the other unit, for reasons unknown. I put it on charging a half block of concrete.
I do not know why it tripped the GFCI.
On the other setup, i put a bunch of quartz rocks and crystals yesterday, as well as a few other stones.
Incidentally these things make the speakers on my PC buzz a bit. Now more loudly with the 2nd unit going. They apparently emit some wavelength that the house wires pick up.
Offline
#19 2025-01-27 19:08:35
- Loohan
- Administrator
- Registered: 2014-10-31
- Posts: 33,612
Re: high frequency facial wands
Wow, my rod finally got fully charged. This is the BIGGEST one i ever made, and it's brass.
On the left.
So, i suspect all metals will take and. i strongly suspect, hold, the charge. And so will quartz and probably many other stones.
So, old-school Croft orgonite with quartz and shavings might be the most reliable type of resin device for this.
I would ask ChemmerBuster to program it all for a particular function while the resin sets up, before putting the device on the zingaroo.
I need to do some pouring in a few days here...
Offline