high frequency facial wands

Loohan · 2025-01-01 16:44:25

These can be used for boosting orgonite, concretite, etc.

https://www.trulyyoumedspa.com/blog/the … -treatment

High-frequency wand treatment works by emitting a low-level electrical current that is applied to the skin. This electrical current causes a thermal effect that helps to increase blood circulation and stimulate collagen production. The increased blood flow helps to bring more oxygen and nutrients to the skin cells, which helps to promote healthy skin.
The electrical current also helps to kill bacteria on the skin's surface. This is particularly beneficial for individuals with acne-prone skin, as it can help to reduce breakouts and prevent future acne flare-ups.

Some modifications are required for our purposes.

Daryl BubbleTechManifest turned me onto this. He's our newest member. (The reason he does not show up as our newest member on the bottom of the homepage is, because having lost my admins, i know of no way to register a user except by hijacking the membership of someone who hasn't been around for years.)

They are inexpensive. Consider buying one if you're into orgone crafting. More info will follow.

Loohan · 2025-01-01 18:55:07

Also many of these have tubes with Neon and Argon in them. I have used plenty of noble gas light bulbs and ampoules in devices.

jeaux · 2025-01-02 17:20:11

Any leads on a good set to buy? Here's one of the cheaper ones with neon. But I'd want something that feels, you know, not corrupt in some way.

https://www.amazon.com/High-Frequency-F … 9818&psc=1

Loohan · 2025-01-03 07:47:42

I haven't noticed any funky ones. This looks just like the Houzzi i bought. Probly same Chinese factory.
Apparently lots of people don't like electroshock on their faces, as there are planty of them on eBay sold as Used or "New, Open Box" ha ha.
Personally i try to avoid doing business with Amazon when i can find similar or better deals on eBay.
In fact i bought a 2nd one. Daryl bought me the first. This stuff charges concrete so i can zing my foundation while i upgrade devices.

A wire is run to the target objects. More info soon.

Loohan · 2025-01-04 16:02:36

These things are not meant to be run for days, weeks, etc. The business end gets very hot and will burn out. You will need a FAN and hopefully a cool place to run it. I have mine in an unheated room in the winter, with a fan on it.

There will be a cap on the bottom you need to "unscrew". But it's not threaded. Rotate it back and forth and tug to ease it out. Then you can remove the guts and use the rest for a sex toy or discard. This will allow it to run cooler.

Then you will need to take some braided copper wire and wrap it around the copper thing near the business end. In my case i wrapped it in a slight gap mine has between 2 copper pieces there.
Strip a few inches of the wire from that end first. Also strip some from the other end.

More later, and a pic... Hopefully Daryl will jump in if better advice is needed.

Loohan · 2025-01-04 17:04:07

You can splint the mess together by taping chopsticks on it or something. I haven't gotten around to that yet.
I don't why this thing feels so intensely "orgoney".

Daryl says the effect is much greater on concrete, even old blocks, than orgonite. But, i don't think his orgonite is very strong to begin with, plus so far i have only selected specific items that i intuited would respond well. Possibly most of my stuff would not change much.

1stBatch1.4.25.jpg
This is the first batch i did. The resin items were very good to begin with, but now they feel amazing.
I also put in 2 old concretite ice cubes with the Plasterite Program. I don't think it made as much difference on them.
This batch i put in a bucket and covered with water. The charged water is pretty amazing too. I poured it down my sink and toilet, and when it hit the concretite septic tank, it made a difference i could feel! I have some better ideas of what to do with water next time.
That batch took almost 6 days and i could feel as it gradually approached full charge, and knew when it was done. But if you're not that sensitive, go with a week.

Currently i am doing a dry batch, with several pieces touching each other. Again, pieces that i was drawn to do this with.

Loohan · 2025-01-06 12:09:34

upgraded1.6.25.jpg
This is something i made around 3 years ago, with a lot of help from my hyperdimensional wives. I juist finished charging it.
This one took 5 days. It is at least 3 gallons in size. Hmm, 3, 3, verrry suspicious.
It was real strong before but now it is much stronger.

I added more stuff later 2-3 times to the collection touching each other. Those are still cooking.

This piece as well as the 2 larger pieces in the previous pic are all programmed as MANIFESTERS. (3 again, can't escape it.) Daryl says this tech is good for manifesting.
One of the items i am attempting to charge is a large manifester crystal. I dunno if that will take the charge.

But i am also charging items with other functions.

Daryl BubbleTechManifest · 2025-01-06 23:02:15

Yes charging concrete instead of plaster or orgonite pieces is called Bubble(large orb that clairvoyants see)Tech (physical/metaphysical science). As for charging anything connected to the ground. We have not determined if the energy will eventually all just get leached away by the ground. Its reported that if a BT (Bubble Tech) is left bare on bare concrete floor, its energy gets leached away and must be recharged the full 9 days. Unless you are sensitive or something and know its fully charged sooner.
Most basic formula is use the V.iolet R.ay W.and on old concrete chunks or Mason blocks for 9 days or until fully charged. Bricks dont charge up "bubble up" much at all. Complex but more powerful is in the latest bubble tech file on the bubble tech group called Bubble Tech 101 for newbies. Formula is so cheap. 23% cement + 23 Iron oxide powder (NATURAL) + Sand. Throw bare wire down middle of the pot of mixed / poured ingredients and charge from glass tupe on wire or wire to wire (best). But even regular orgonite 'bubbles up' but we found concrete bubbles best and radiates a larger more intense field and way better for planting seeds in the aetheric 'cells' (manifestation). Water and some other things 'bubble' too and therefor support manifestation. The Orb i mentioned is your inner manifestation heart chakra spirit and so will not obey manifestation commands that will bring you bad karma. According to IQ genius spiritual physicist Mike Emery. I personally was miracle cure by it! Though i had 5 quality ones made at the time. Many testimonials but most people don't experience a health miracle. But the miracle testimonials are a great read! VRW - yes keep a fan on them and in as cold a room as you can. If you take it apart, make sure you unscrew the screw where the glass tube inserts. Then carefully twist apart bit by bit. Then you can definitely run 24/7. Once a concrete bubble is charged up it stays charged to at least 90% unless accidently drained by the above. Charge crystals with the VRWand... hmm that should be fascinating. Maybe put different kinds on a foil sheet and see what results Happy Manifesting.

Daryl BubbleTechManifest · 2025-01-06 23:07:52

Daryl BubbleTechManifest · 2025-01-06 23:10:45

VRW splint and small fan above

Daryl BubbleTechManifest · 2025-01-06 23:15:28

Loohan · 2025-01-08 16:13:03

bigrad1.25.jpg

Yes! This one is not a manifester exactly but more of a weaponized radionics unit. It weighs 40# but required less time than some other things that are smaller and still cooking. Do the metal rods get programmed? I doubt it, or if so, maybe not much. I do have a big rod in the cook pile.
But this also has a lot of epoxy. Everything except the top hardware cloth is glued on by pouring epoxy over it. There are also many stones, among other things.
It has 2 banana jacks going to an internal coil. I ran the juice into it that way, and back out into other items.

I could feel it working more aggressively when it was getting charged. It is very powerful and sophisticated and can take on a lot of bad stuff.

It has 4 potentiometers for fine-tuning. It originally was like this over 6 years ago:
https://forum.loohan.com/viewtopic.php?pid=10637#p10637

but a few months ago i removed a bunch of the guts and added different stuff.

Loohan · 2025-01-13 09:35:36

Yesterday i noticed that the 2 concrete ice cubes have lost what charge they had. I've just had them sitting on a plastic surface.
The resin items seem to be retaining their charge.

I do have a bunch of concrete blocks and half-blocks left over from a batch i bought at auction in 2011, and who knows how old they were before that. So they are well-aged. And i will be trying a half-block in the near future.

jeaux · 2025-01-14 15:58:53

Just ordered two sets. I've combed this thread and there's something I'm missing here . . .

I get wrapping the braided copper wire around the brass "business end," but what does the other end of the wire do? I see concrete being charged, orgone objects, even water, but how are you attaching the other end of the wire to the item?

I see that Daryl placed a copper wire in the middle of his concrete items, which the wire can connect to, but Loohan, what are you doing to connect these devices to the wire?

EDIT: If I'm guessing right, you run the juice through a device with internal wiring, and then have other items touching that one device? Am I correct? And Daryl has a theory that connecting the wire to some foil and placing crystals on it might work? I wonder how that would be wired.

Last edited by jeaux (2025-01-14 17:07:16)

Loohan · 2025-01-15 09:53:06

jeaux wrote:

Just ordered two sets. I've combed this thread and there's something I'm missing here . . .
I get wrapping the braided copper wire around the brass "business end," but what does the other end of the wire do? I see concrete being charged, orgone objects, even water, but how are you attaching the other end of the wire to the item?
I see that Daryl placed a copper wire in the middle of his concrete items, which the wire can connect to, but Loohan, what are you doing to connect these devices to the wire?

EDIT: If I'm guessing right, you run the juice through a device with internal wiring, and then have other items touching that one device? Am I correct? And Daryl has a theory that connecting the wire to some foil and placing crystals on it might work? I wonder how that would be wired.

SORRY, i meant copper. There is no brass. I corrected this post now.
The other end just droops into a bucket of water, if using one. Or just lays on a piece, and other pieces can be in contact with the piece.
Or, run into an internal coil. In my case i run the end of the wire into an internal coil, and if the coil has 2 jacks, i run a patch cord into another item. Nor sure whether dead-ending into thin wire for days can cause any harm to tape etc which might be in there, so i run the pulse back out. Currently into an orgonite piece that simply has a banana jack sized hole drilled into it, something i often have for passive connections.

In the foil case, i presume one might tape the wire onto the foil.

Loohan Forums

#1 2025-01-01 16:44:25

high frequency facial wands

#2 2025-01-01 18:55:07

Re: high frequency facial wands

#3 2025-01-02 17:20:11

Re: high frequency facial wands

#4 2025-01-03 07:47:42

Re: high frequency facial wands

#5 2025-01-04 16:02:36

Re: high frequency facial wands

#6 2025-01-04 17:04:07

Re: high frequency facial wands

#7 2025-01-06 12:09:34

Re: high frequency facial wands

#8 2025-01-06 23:02:15

Re: high frequency facial wands

#9 2025-01-06 23:07:52

Re: high frequency facial wands

#10 2025-01-06 23:10:45

Re: high frequency facial wands

#11 2025-01-06 23:15:28

Re: high frequency facial wands

#12 2025-01-08 16:13:03

Re: high frequency facial wands

#13 2025-01-13 09:35:36

Re: high frequency facial wands

#14 2025-01-14 15:58:53

Re: high frequency facial wands

#15 2025-01-15 09:53:06

Re: high frequency facial wands

Board footer