Loohan Forums

Luke

Enabled users

Registered: 2016-08-14

Posts: 71

Frequency

Hello,
I am new here. Because I am a technician I am wondering if someone know if there are eletromagnetics frequencies somehow connected with these creatures.
It would be nice to figure out which electromagnetics frequency corresponds to specific creatures. I have professional device, which measures electromagnetnics frequencies and i found out, some strange frequencies for which i cannot fugure out where they come from. I think, they come from some of this creatures.
Does any man here, have some experiences about this?
Best wishes, Luka.

ndw

Enabled users

Registered: 2014-10-31

Posts: 741

Re: Frequency

Hi Luke,
I think so.
but I think such frequencies are difficult to catch with precision.

In theory everything has a frequency, his resonance one.

Maybe Loohan can dowse them
I know that there are some frequency that usually I dowse for, to see if items have demons, etc... when I receive objects by mail.
Maybe you can develop a system to reveal these, since I just use a Lecher antenna dowsing system.

Probably what I am dowsing is near to a Thera hertz frequency.
Or maybe it is in the ELF I dunno.
I still have to post how I have developed my Leecher antenna, then it will be easier for you to understand this matter.

Nice to have an expert in electronics in the forum!

welcome btw!

Luke

Enabled users

Registered: 2016-08-14

Posts: 71

Re: Frequency

Ia have an idea, how to do this. Because we are in the different parts on the world, we should corporate by internet.
I can put frequencis of magnetic field in this forum. And then you check it out if here are some creatures, where i live.
This process must go on.
So idea is, that i measure frequencies in my house. I give you my address and you figure out, if here are creatures. Then we can find their frequency.
I measure these frequencies in my house: 23 Hz; 55,6Hz; 307,3Hz; 1,3kHz; 209,5 kHz.
They must be connected with some creatures, because are unusual, except 55,6Hz which is power grid system.
My address is: Luka Lenarcic Velika Pristava 24, 6257 Pivka, Slovenia.
Can anyone check if there are some creatures in that place? So that i connect them with frequencies.
Best wishes, Luka

Last edited by Luke (2016-08-15 07:41:45)

Luke

Enabled users

Registered: 2016-08-14

Posts: 71

Re: Frequency

The next thing is to figure out, if underground bases influence on earth magnetics field.
I can measure earth magnetics field at certian location but not at distance.

ndw

Enabled users

Registered: 2014-10-31

Posts: 741

Re: Frequency

Hey Luke,

I would be interested if you have a DIY for a very sensible gaussmeter, so to measure Earth gauss...
I was just researching this today

For the frequencies... I just thought they can be done by HAARP

should I have some kind of advanced radio to scan for it?

If so, I think if a DSLR usb or what ever is the correct name, I mean those USB devices used to watch TV and listen to radio...
I know there are a lof of hacks to use them in different ways. But I don't know how much sensitive they are. Of course antennas are important too.

Luke

Enabled users

Registered: 2016-08-14

Posts: 71

Re: Frequency

I have professional device called AARONIA AG.
It costs several thousands eur. And it is made in Germany. This is very good machine and you can besides other things locate source of electromagnetics radiation. So if someone put emitter beside you, you can find it.
Other choice are smart phones, who have integrated sensor. But they are bad for such use.
Luke

ndw

Enabled users

Registered: 2014-10-31

Posts: 741

Re: Frequency

cool stuff!

maybe you already know the stuff below but it is just what a friend told me about:
23 and 55 can be relative to electricity so just try by shutting down electricity in your property and see... submultiples...

209 khz http://www.shortwaveschedule.com/index.php?freq=209

and check for switching transformer, usb, battery chargers...

another cool link
http://www.spectrumwiki.com/wiki/Displa … splyId=190

Loohan

Administrator

Registered: 2014-10-31

Posts: 32,901

Re: Frequency

I think the easiest thing is to simply dowse the number of species and have Fred delete them.
Luke has been doing this lately.
He tells Vozy but Vozy refers it to Fred.

ndw

Enabled users

Registered: 2014-10-31

Posts: 741

Re: Frequency

so Luke should not find these freqencies any more once these species are gone, right?

Loohan

Administrator

Registered: 2014-10-31

Posts: 32,901

Re: Frequency

so Luke should not find these freqencies any more once these species are gone, right?

I see no value in getting freqs for low-grade demons easily eradicated in less time than it takes to dowse a freq.

ndw

Enabled users

Registered: 2014-10-31

Posts: 741

Re: Frequency

ok but I thougth it would be interesting, and much interesting from a 'scientific' point of view, to have a confirmation that some entities does emit radio frequencies and if we can prove this... good job!

Loohan

Administrator

Registered: 2014-10-31

Posts: 32,901

Re: Frequency

Oh, OK, just realized what was being discussed. In 1st post (which i had not carefully read), Luke says

I have professional device, which measures electromagnetnics frequencies and i found out, some strange frequencies for which i cannot fugure out where they come from. I think, they come from some of this creatures.

I thought he was dowsing the numbers. He had written me before about this and i thought he said he was dowsing them.

The fact that they emit measurable RF freqs is indeed interesting.

Then again, don't they make ghostbuster devices based on this?
I once bought one BTW, which did not work at all. So i returned it and they replaced it with another identical dud. Then they tried to gouge me for a 20% re-stocking fee to take it back. LOL

Luke

Enabled users

Registered: 2016-08-14

Posts: 71

Re: Frequency

Well now we are doing scalar generators, which works well agains demons.
What scalar generator is?
This is a long story that last for 10 years. First I meet Tom Bearden, he was telling about scalar waves and he wrote pictures of it. But I didn't understand what is going on. Then I forget about this, but i always had a wish to figure out. Then i got some job and i had a lot of free time and i surf on internet.
Then i got a point. Scalar waves are made, when two opposite waves strikes into each other. This may be electric or magnetnic field. And if we want to make emmision we must have accerlate current(AC), This is well know from physics.
So i find the way how to do this. First i made Two coils that do this, but then i made one coils with two oppossite layer. I also made four plate capacitor. Now is Loohan doing this, so i can relax.
We can also make these waves if we have a motor with permament magnets. This should be a special motor, magnets should move against each other, like we are swiming with hands.
Best wishes, Luka

Loohan

Administrator

Registered: 2014-10-31

Posts: 32,901

Re: Frequency

Yes, as soon as i can get this thing out of the mold, i will post pic. It is working good! Because the combination of Luke's coil and the Committee pgms makes it radiate strong demon-crushing field which helps a lot. Also, since i cast it in plasterite with resin base of Strontium-Barium pgm (which hits PHYSICAL critters) it is probably good to weaken SSers, werewolves, etc.

BTW Bearden was SSer, now replaced by repticlone.

Loohan

Administrator

Registered: 2014-10-31

Posts: 32,901

Re: Frequency

Actually, here is the first part:

I cast some concretite in test tubes. I used 1 part Portland cement and 3 parts BIONIZED sand. The substance is too brittle to remove from mold in one piece. It makes no energy difference to leave the thin plastic tube on.

I split a cheap extension cord and wrapped a few turns, i think 8 in a spiral, than backed over it in opposite direction 7 times (the details of what gauge wire and how many turns do not seem critical). There are many ways to do this right, and it is hard to go very wrong with this, is my impression. But of course, as in building any orgone device, it is helpful to have intuition about how to fit things together.

Then i glued a few rhodizites to the outside of the wire, according to intuitive feel.

I shortened one strand of the cord and connected it with a crimp connector. Probably ideally it should be soldered instead, but i am lazy and don't intend to run much current thru this anyway.
I DID WRAP ELECTRICAL TAPE (after pic was taken) around the connector ends to SEAL OUT ANY WET PLASTER.
Then i re-cast in a plastic Halloween skull (this is what 'Vozy chose out of all my molds -- but probably my next ones will be very different). I used pure plaster for this 2nd cast, which got the Water-Charging Pgm (because the wire prevents the Plasterite Pgm from taking). I used plaster because i have a bunch i bought that i might as well use up where moisture is not a threat. I left everything inside the plastic skull. I used no sand in the plaster because i got that it would work slightly better just plain in the 2nd cast.

Then later i re-cast the skull onto a resin base.

This gets PLUGGED DIRECTLY INTO AC HOUSE MAINS. Yet feels extremely smooth. A small load needs to be plugged into the extension cord to get a bit of current flowing.