orgonite HHG base

ndw · 2015-01-08 16:17:48

Today I've got this idea, why not made a base of an HHG with stones that have colors that follow this compass?

it's the odic force compass of Reichenbach (a good article here).
it's similiar to the compass of Feng Shui.

I don't know if it is suggestion but it takes out a good wave of energies.
What do you feel guys?

some stones are not visible..
they appear like mirrored so when you place the hhg in the floor they are correctly aligned with cardinal directions

edit: also tourmaline, tiger eye, black obsidian and selenite in the base, missed to write that, the others various color, well I don't have idea, just the blu should be sodalite

cosmicbal · 2015-01-08 19:36:32

I like it. But what if you used 2 of each stone in their placement, like say a tumbled smooth stone as you have now on the outer circle, and a rougher/uncut stone of each laid next(touching) to it aligned radially like a bicycle spoke? I think this would give it more of a punch, but still soft around the edges. Just me, but that's what I'd like when i see this.

Other than that I do like it. I can't tell if it's the energy I'm seeing, or the lavender "blush" it has is the tint of the epoxy(or polyester). please let me know

Also, if you could get your hands on some 10-12 gauge single strand copper wire and strip the plastic off in place of the thinner gauge wire..

I hope you don't mind my critique on your creation. I do love it though.. i'm gonna try to send you an email. lemme know if you get it.

Oh yes.. also I wanted to ask if those were steel shavings or something else. I've been using magnesium shavings and i really like the feel. I have yet to use steel in anything except for steel wool..

As I understand it, orgonite can be judged by level of programming potency, but i also tend to be swayed by the flavor a bit too.. I like the lavender flavor. Like a light blue and a violet mixed together. i have no idea if it's energy or pigment i'm seeing.. damn. kinda how eye colors change. what's real? I guess all of it.

Last edited by cosmicbal (2015-01-08 21:08:40)

ndw · 2015-01-08 20:23:26

I had the same idea to place more stones radially, but I don't have so much so I thougth to try it simple at first. Ok
The polyester resin I'm using has a violet color, not really blue.
For the bigger cable, yes I'm going to search it since anyway I have ended this tiny wire that I've used, and I prefer bigger, easier to take the correct form.
The shavings are aluminium.

Ah, all the quartz point used are bionized, other stones are normal. However the remaining stones I have are under bionization
any critic is welcome!
I'm here to learn and share!

cosmicbal · 2015-01-08 20:49:01

Also, instead of snowflake obsidian in the middle what if you stood a piece of black tourmaline tied with a piece of selenite tide together with a coil going opposite direction as the outer coil? Or perhaps made a small cone with selenite and tourmaline at tip touching the copper wire

:edited to add pic

I'm getting inspired(to copy you if i could).. and i think your setup is actually good as it is. But yeah, Selenite tied to Black tourmaline like a bundle of sticks. perhaps you could put this in the tip. or the next layer. but it looks like this is one layer total.

So if you use a thicker gauge copper wire, maybe the heat shrink effect wouldn't let the copper pop out? I assume that's what happened. and even if it did, i think you could boost the power of the copper wire if you poured a small layer in the mold, let it dry, then poured a mix of shavings high enough so that when you stick a finished [smaller] cone in, the resin would rise up around it, and when it hardened you'd have given the original cone a shell. This way the copper wire is embedded further from the surface. This would allow the outer dimensions of the coil to absorb and direct the orgone of the outer shell as well. not just the innards. But i wouldn't let the outer coat rise to encompass the whole thing, or drown it so to speak.

i think the black tourmaline tied to the white selenite would be nice. or used both and stand the snowflake obsidian in the middle above or below it..

ndw · 2015-01-08 20:57:19

well, there is selenite and black tourmaline in the base, missed to write, just edited the post with that infos.

I think they are best in the base to trap negative energies entering in it

I will try multiple layer next pour, almost ended resin for now..

yes the coil is a bit a problem, it can stick out... maybe a second recast will be perfect..

ndw · 2015-01-09 15:20:59

Ok, now that you have added the image I got the point of the little coil with tourmaline and selenite in the base.
But I suppose that too much coils can make strange things, anyway I can try it next time, I'm missing copper right now

cosmicbal · 2015-01-09 21:46:05

You want strange, "Eschew Orthodoxy".

For me it would condense more energy in the tiny coil if wound upwards clockwise while the large main coil is wound downwards clockwise. The coils would complement each other in a merkaba fashion.

Also the shabby diagrams neglect to show the small cone coil has the tourmaline and selenite in it. Perhaps held together with pgmd shurtape if coil fails to do so.

And I feel like you should leave tiny cone #3 with no coil absent of shavings, but perhaps leave it clear or with some amethyst points or crystal powder/sand. Or a piece of aragonite: www.spiritrockshop.com/Aragonite.html

Metaphysical properties of aragonite as I recall are said to balance left/right brain, and male/female energies with the body. I had a piece of green and orange half n half aragonite that felt amazing but stupidly imbedded it in a way too complex unit.. My arrogance at the time cost me a lot of pretty crystals. Unit has power but could've been better. Though I have a chassis audio jack intertwined with it's innards and makes a great audio radionics unit.

Wow, really off topic. Basically if you had tiny cone labeled #3 , in bottom right of my Rembrandt masterpiece, with the aragonite, which would be the antenna of the coils in #1 and #2.

Hopefully if made, it'd be more than just an idea on aesthetics and orgonite fung shui. The more clear the aragonite, the better I think. More green too.

Last edited by cosmicbal (2015-01-09 22:03:08)

cosmicbal · 2015-01-09 22:11:18

What if you could make a coil around the base where the inner large coil 2 protrudes from the shell, #4? Like wrap an extension cord around it and ground it to your bed frame or outside in the ground, or both?

What could all these ideas hurt? Could only help.

Loohan Forums

#1 2015-01-08 16:17:48

orgonite HHG base

#2 2015-01-08 19:36:32

Re: orgonite HHG base

#3 2015-01-08 20:23:26

Re: orgonite HHG base

#4 2015-01-08 20:49:01

Re: orgonite HHG base

#5 2015-01-08 20:57:19

Re: orgonite HHG base

#6 2015-01-09 15:20:59

Re: orgonite HHG base

#7 2015-01-09 21:46:05

Re: orgonite HHG base

#8 2015-01-09 22:11:18

Re: orgonite HHG base

Board footer