You are not logged in.
It recently came to my attention that a lot of people are now making plasterite with Plaster of Paris, water, and sand. And it feels surprisingly good. Do a search for pics and instructions.
I did my first experimental batch last night:
They were still damp this morning so i set them out in the hot sun all day.
The instructions i read said to use 2 parts of plaster with 3 parts water, but that seemed awful wet, so used about 1:1.
(edit: WRONG, it called for 2 parts water and 3 parts plaster! So i made it too thin, which may be why it is still slightly damp feeling.)
Then added a bunch of sand, about 30% of it bionized. And a few bionized quarzites. Also a bit of turmeric. I did not add salt.
All the other plasterite i have seen pics of seems about the same quality (pretty good that is):
But mine feels different due to programming and bionization of ingredients.
The only Committee program we have for the plaster so far is the Water-Charging Program, the usefulness of which is much broader than just charging water.
Then the bionized ingredients get other pgms, and the non-bionized sand gets other ones.
Of course the result is pretty crumbly. Some of these i may tape up with metallized tape and re-cast in epoxy.
I am looking forward to working with this stuff more.
Offline
The sand and quartzite takes demon-jailer pgms, too. These things are cutting into evil and jailing demons, so they feel much different from the harmonious, mellow "mainstream" plasterite.
I've got 1 of them wrapped with that special tape...
Offline
Woops, actually i was supposed to use 2 parts water and 3 parts plaster, not the other way around.
Offline
if you use too much water it can take months to fully harden.... if not forever...
I usually place water, then add plaster until i cover the whole water, then I mix it. carefully add it without mixing other wise it will start to harden.
I add it like I dust the water (seems like the translation is not fully correct...)... I slowly let the plaster to go down from my hand in the water...
Offline
Was checking the plasterite gallery site Loohan posted on blog http://orgoniteplus.jimdo.com/plasterite/gallery/ ...really feels and looks nice and interesting. Included instructional video: https://www.youtube.com/watch?v=wgyBv3uSrlw
Probably would be good to use some spray varnish....also saw some resin thickener, which alows resin to be layered by paint brush easily.
As far I saw, and have a bit experience working with plaster, it can be only made whole unit at once, not in layers....or anybody tried to do layers?
Offline
I would not use paint, it can disrupt the energy. Just have this feeling.
never done in layers, I don't have ingredients now...
Offline
Also I would say, since plaster does cost almost nothing, it is better to make very big devices. like cones 1 meter tall. or obelisks.
Offline
Kind of reminds me of the cemitite, has anyone ever checked out the old lab rat on you tube? He has some pretty good videos on using cement to make orgone, I had made some using cement and really small coils made with network cable and had got some pretty good results, the cemitite actually I know there is a separate thread for it but this reminds me of the cemitite.
Offline
To me, this stuff feels much better than cemenite.
Offline
I just want to clarify a bit, and feel free to comment the following points.
Plasterite, to me, is not orgonite, it is like a big crystal. then maybe I'm wrong but this is the impression I got.
mine is with quartz, selenite, citrine powder, rose quartz powder and sodalite powder.
for cemenite I cannot judge since I never have done one, but I doubt a lot about it. cement.. doesn't feel right to me..
although it is still Carbon based. so Organic.
Ca(OH)2 + CO2 → CaCO3 + H2O
but the molecula is not a long chain one, as in polyester/epoxy so I doubt for this too...
the molecula of Plaster is
CaSO4 + H2O
the formula is 2CaSO4·½H2O +3H2O ==> 2CaSO4·2H2O + heat
infact it does produce heat. but doesn't seems to shrink. so probably no pressure on the xtal.
missing Carbon. So it is not Organic from a chemistry point of view.
and it does too miss a long chain molecula.
As I dowsed a bit my plasterite, I have fiund it has the base CCW, so entry point, and top CW output. like a xtal, entry and exit. as well as in an orgonite.
I like the idea to put a plasterite inside an orgonite. Does feel right to me. like we used to put xtal, put a plasterite xtal.
The effect I got from Plasterite is of white energy. And I wanna make a very big one, maybe 4. but wanna include a lot of stones so it is not to see it soon. also have to find the right big mould.
I would say, do some yourself and see what it feels to you.
In the end if I place an hand over a plasterite, without touching it, I feel similiar effect than an orgonite, but is more similiar to a xtal to me.
although I tested it does shutdown an hartmann node. So somehow has the effect of an orgonite in this case
Last edited by ndw (2016-06-23 15:47:17)
Offline
Yeah. To me, the plasterite almost mimics resin orgone a little bit, but mostly it has stone-like energy qualities. I don't think it's a complete substitute for resin orgonite. But it comes close and is worth making!
Offline
Last night after i went to bed, we were given a NEW PROGRAM just for plasterite.
Strongly anti-evil.
It is rather unusual how we got it. I heard unusual bird sounds that seemed unfamiliar and also stopped after i "got it". The bird delivered the program via chirps that encoded the pgm! That is, i heard these "annoying" chirps, then realized they made me uncomfortable because they chewed on hidden demons which then broadcast their irritation or something.
Then i realized we could convert the sound into a program. Then i realized it would not work for resin, only plasterite.
Haven't poured yet today. Of course the plaster must be "raw" to get the pgm.
BTW i think this pgm is metal-phobic, so i would avoid putting metal in. But metal is not usually used in plasterite anyway.
(Update Oct/2016: this program is no longer metal-phobic, and it is now OK TO PUT METAL AND RESIN ITEMS IN IT.)
Offline
These huge "plasterites" from found photo, road cones were used as molds ?
Program for plaster only is a huge breakthrough... low price, easier to handle than resin etc. about plasterite i didn't heard before, i will try to do some pieces with both of them.Before i organise things to do it and buy all needed stuff you guys would probably try every possible shape and size
I'm waiting for your updates on this subject
" I willed it, so I became it"
Offline
I just poured a traffic cone full. Getting the new pgm which i think will take care of many demons.
It's also great to be able to make a large unit in 1 pour, with no overheating.
I suspect that if poured in layers, they would tend to separate. And there is no reason for layers.
Also, unlike ndw, i don't have any difficulties mixing the plaster. I am using the bulk stuff from Home Depot, and it mixes smoothly and easily with no lumps.
Offline
Hi guys! Loohan send me the link of this thread. I already saw last nigth and decided to do. This is the first. have more couple curing. Here in Brazil, plaster is beetwen R$2 to 4, for 1 Kg. When, resin, the most cheap is R$ 20 for Kg... a good option in moments like us LOL.
I love this! Even not been a good sensitive, I felt a sweet energy coming from it,
Offline