some devices

diego · 2015-10-14 16:39:26

Hi everyone!

Im from Brazil, and email Loohan to ask some help... I would like to share the devices and wait for the feedbacks... I dont know how its the function of this forum, but I think that I can put one more device in the same post? I wait a confirmation to do this... first I will post my update CB, I used to call it Anti-CT... I "recycled" two devices... put 4 layers... the first with March2015B pgm, the second with a pgm that I do know the name and your propertie, yet... for while I call them AntiCT pgm, cause I received some intuitions about that fact, maybe I can be wrong...

The third layer with grid-pgm and th last SB pgm... I think Vozy help me to do this mobius coil...

Over it I put another device that I made in a day before... a 6 layer pgm.. with 2 pgms that my allies "send" to me... P619A pgm and MEHQ pgm... I try, too, the PRG pgm, March2015B pgm, and VF pgm... the layer with aluminium foil was pgm with something like anti-evil pgm...

I decided to put some leds and connect this CB with my another device that I call Stabilizer

PS: the sequence of coolers are not working at time... I feel they already done their purpose

I have a little difficult with the English, but we can try to do something LOL

Thanks!

Last edited by diego (2015-10-14 20:16:41)

Loohan · 2015-10-14 18:28:01

Sure you can put as many devices into your thread as you feel appropriate.

Diego is a Pleiadian incarnate with a Pleiadian support team of discarnates, who come up with some great programs. Some of these will be available from The Committee.

ndw · 2015-10-14 18:37:05

wow what a setup!

Diego, what should do these fans?

diego · 2015-10-14 19:34:44

In Brazil about 5 years ago a group of 4 or 6 people started to do some orgonite devices with some crushed crystals and minerals... I discovered it last year in november and decided to try... but now I feel that they are not more necessary even they are very functional, but seems not have a good synergy with the new devices

kyanite black and blue, selenite, malaquite, magnetite, almost black minerals, quartz (all of them) is the most used in this devices... The rotation make a magnetic vortice with the properties of each mineral and crystal... this vortice help to annul and dissipate the chem... have some association with ionization of the atmosphere (in a cientific perspective)

diego · 2015-10-14 19:38:35

In this video you can see some of this devices...

www.youtube.com/watch?v=6FpwSA15H40

This video is edited by a guy who is a orgone device maker of Brazil...

Loohan · 2015-10-14 20:04:50

Some people in CA were influenced by Brazilians and have been using fans.
Unfortunately their forum is now members-only to view:
https://bustachemcloud.wordpress.com/

But i tend to agree that with the kinds of programs we use, the fans might not help.
Personally i would be intrigued by a SLOW turntable, heavy duty like a potter's wheel so you can stack long-range wands etc on it. Maybe around 5 RPM. This would sweep a wide area for demons and evil ETs. You could even have 2 wheels spinning in opposite directions at slightly different speeds, for maximum randomity.

diego · 2015-10-14 20:19:52

CORRECTING

I forgot a item... this device had 4 LAYERS... I already update the post... sorry!

diego · 2015-10-14 20:22:39

Loohan wrote:

But i tend to agree that with the kinds of programs we use, the fans might not help.
Personally i would be intrigued by a SLOW turntable, heavy duty like a potter's wheel so you can stack long-range wands etc on it. Maybe around 5 RPM. This would sweep a wide area for demons and evil ETs. You could even have 2 wheels spinning in opposite directions at slightly different speeds, for maximum randomity.

Last month I was thinking to put the BLOCK in a old motor of washing machine... LOL

BLOCK is the device made in a pipe mold.

Last edited by diego (2015-10-14 20:25:54)

cosmicbal · 2015-10-15 15:24:01

Great job man! I really like the purple LED lights. I think the light protects it a little. I bet your coil is similar diameter to the one Antuvozy guided me to make a few years ago. Have you felt a need to wrap it with shiny tape in certain spots?

Your orgonite has a really friendly and wholesome vibe to it. Or maybe it's just me.

I have been thinking about embedding LEDs in orgonite, but worry that they might break and become useless in the resin, or overheat the resin. Have you found this to be a problem?

What did you use to make the tall cylinder without damaging the orgonite with removal from the mold?

diego · 2015-10-15 16:32:55

cosmicbal wrote:

Great job man! I really like the purple LED lights. I think the light protects it a little. I bet your coil is similar diameter to the one Antuvozy guided me to make a few years ago. Have you felt a need to wrap it with shiny tape in certain spots?
Your orgonite has a really friendly and wholesome vibe to it. Or maybe it's just me.
I have been thinking about embedding LEDs in orgonite, but worry that they might break and become useless in the resin, or overheat the resin. Have you found this to be a problem?
What did you use to make the tall cylinder without damaging the orgonite with removal from the mold?

Thanks!
About the coil I feel a necessity to put more copper and black tape... until now nothing about this kind of tape, I think its is difficult to find in my city.
I put the leds only between the two devices... and a support... I took off them from this type of RGB lamp.

This lamp have a little eletronic plate that transform the energy of line force of house (127V in here) to something between 12, 18V... You can see this fixed on the table, near the wall.

Put the leds in the device and pouring the resin I dunno... I`m not tryed do this yet.

This cilinder I call The Block... in a PVC Pipe... very dificult to take off... I use a tool like that (i dont know how you call)

faux%2Bcopper%2Bpipe%2Bvase%2B13.jpg

I just make a little cave to try to open the mold... LOL This type of mold results in a good device like a lot of cuts on hand...LOL

Loohan · 2015-10-15 18:26:19

Not to stifle anyone's creativity, but i will point out that years ago, several of my devices had LEDs in them, and it did boost their performance. It also attracted sprites(?) which boosted the performance even more.

However, then these devices were reprogrammed many times as the programming improved, and eventually the LEDs (and 555 circuits and amps) were not doing anything more when plugged than with the electricity turned off. And the sprites' presence also was made obsolete, so they moved on to more meaningful activites.

At this time i have NO orgone devices running on electricity.

diego · 2015-10-15 21:30:40

It the first time that I heard about sprites... I was reading the OTB 23, and what exactly their energies do?

cosmicbal · 2015-10-15 21:59:18

That saw is called a hacksaw in English.

LEDs still look pretty cool. Even if you wanted to use your orgonite as a night lamp. Or built a simple 9v circuit from parts to create a portable LED light show.

I wonder if you cut a pvc pipe in half length wise, used really thin and smooth tape to create a door hinge on the inside, to open and close it, then used silicone window seal and or tape I the outside of the other seam. And used a really shallow end cap with a release agent tip remove. That way you could pry the sides open easily.

Loohan, how do you make cylinders, like the one used for CerBer's head?

Last edited by cosmicbal (2015-10-15 22:01:12)

Loohan · 2015-10-16 07:53:11

cosmicbal wrote:

Loohan, how do you make cylinders, like the one used for CerBer's head?

That is the left-of-central cone here:

CombatCones9.11.jpg

Those 2 cones have cylindrical sections because i fitted plastic bottles

upside-down over the existing protrusions on cones and recast over them.

I suppose one could take thin plastic signs like No Trespassing signs and tape them into cylinders, or use cardboard tubes and then soak and remove most of the paper.

I haven't made bare cylinders longer than a few inches.

diego · 2015-11-03 17:17:55

I decided to put the device alone outside my house on a couple of big brute quartz and redo the mobius coil... I was guided to update it, but I have no epoxi yet... seems that the CB was being stronger. This next update will be done in two steps: a cone on the top and a new layers in the bottom of the cylinder.

I think that I understood the pgms that they want in this cone on the top, a quartzits was been pgmed with jailers pgm too. The pgms will be:

April2015; Nov2014A; DD; April2014D; April2014E; April2014F and S-B pgm.

I 'm thinking in add Teffa pgm and Earth pgm, but I'm in doubt about.

Loohan Forums

#1 2015-10-14 16:39:26

some devices

#2 2015-10-14 18:28:01

Re: some devices

#3 2015-10-14 18:37:05

Re: some devices

#4 2015-10-14 19:34:44

Re: some devices

#5 2015-10-14 19:38:35

Re: some devices

#6 2015-10-14 20:04:50

Re: some devices

#7 2015-10-14 20:19:52

Re: some devices

#8 2015-10-14 20:22:39

Re: some devices

#9 2015-10-15 15:24:01

Re: some devices

#10 2015-10-15 16:32:55

Re: some devices

#11 2015-10-15 18:26:19

Re: some devices

#12 2015-10-15 21:30:40

Re: some devices

#13 2015-10-15 21:59:18

Re: some devices

#14 2015-10-16 07:53:11

Re: some devices

#15 2015-11-03 17:17:55

Re: some devices

Board footer